Carb sync screws
- nickleo373
-
Topic Author
- Offline
- User
-

Registered
- Posts: 587
- Thanks: 33
Carb sync screws
12 Jul 2014 14:11
Hey everyone
I just ordered some new carb holder boots to get rid of some vacuum leaks. I want to sync the carbs after I install the holders but I noticed the tiny screws on the top of my TK-22s are frozen in place. I've tried penetrating oil with no luck. Is there a way to free them up without completely destroying the carbs?
I just ordered some new carb holder boots to get rid of some vacuum leaks. I want to sync the carbs after I install the holders but I noticed the tiny screws on the top of my TK-22s are frozen in place. I've tried penetrating oil with no luck. Is there a way to free them up without completely destroying the carbs?
1981 KZ550C LTD
"If you ain't first, you're last"
"If you ain't first, you're last"
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: Carb sync screws
12 Jul 2014 15:25
Small vice-grip, maybe.
The real problem is you probably don't have JIS screwdrivers. Get them before doing anything on the inside of the carbs, especially if you try topull out the flat-head screws that hold the thrttle arm to the throttle shaft. Those are notoriously tight. Don't use an impact driver on them.
The real problem is you probably don't have JIS screwdrivers. Get them before doing anything on the inside of the carbs, especially if you try topull out the flat-head screws that hold the thrttle arm to the throttle shaft. Those are notoriously tight. Don't use an impact driver on them.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
